Skil SD561801 - Safety Warnings for Screwdriver; Handling Near Hidden Wiring; Other Safety Instructions; Battery Charging and Storage Temperature

8
Follow all charging instructions and do not charge the battery
pack or tool outside the temperature range specied in the
instructions. Charging improperly or at temperatures outside the
specied range may damage the battery and increase the risk of
re.
Service
Have your power tool serviced by a qualied repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs
should only be performed by the manufacturer or authorized service
providers.
SAFETY WARNINGS FOR SCREWDRIVER
Hold the power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact hidden
wiring. Fasteners contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the operator an electric
shock.
OTHER SAFETY INSTRUCTIONS
DANGER
To reduce the risk of re or electric shock,
carefully follow these instructions.
Before using power supply, read all instructions and cautionary
markings on (1) power supply, (2) battery pack, and (3) product
using battery.
Charge battery pack and/or product within the required
temperature range. Store power supply and battery pack
in locations where temperature is within the recommended
storage temperature range. This is important to prevent serious
damage to the battery cells.