Skil SHD77 - Accessories; Twist-to-Lock Connector Instructions

-13-
**,::690,:
- (5 ,?;,5:065 *69+ 0:
5,*,::(9@ ( *69+ >0;/
(+,8<(;, :0A, *65+<*;69: ;/(; 0: *(7()3,
6-*(99@05.;/,*<99,5;5,*,::(9@-69@6<9
;663 4<:; ), <:,+ This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles.
"The smaller the gauge number, the
heav i er the cord.
!
WARNING
* Blade
* Wrench
** Carrying case
** Rip Fence
** Non-marring overshoe
(*= standard equipment)
(**= optional accessories)
The Model SHD77 & SHD77M code 72 is
e
quipped with a “Twist-To-Lock” male connector
as shown. Use only a 3-wire extension cord
which has a mating “Twist-To-Lock” female
connector on one end and a 3-prong grounding
plug on the other end. (See Electrical Safety
section on page 2 for grounding infor mation.)
"%!""" !" #"! !!!
'$"C"%!""D
"663E:

47,9,
(;05.
69+!0A,05%
%09,!0A,:0544

3-6
6-8
8-10
10-12
12-16
18 16 16 14 0.75 0.75 1.5 2.5
18 16 14 12 0.75 1.0 2.5 4.0
18 16 14 12 0.75 1.0 2.5 4.0
16 16 14 12 1.0 2.5 4.0 —
14 12 —— ————
25 50 100 150 15 30 60 120

69+,5.;/05,,; 69+,5.;/05,;,9:
SM 1619X03173 11-08:SM 1619X03173 11-08 12/2/08 11:21 AM Page 13