3. Ventilation
Providing an environment with good ventilation prolongs the life of compressor and performance.
Air flows into condenser (front) and the outflow of the used air is exhausted via outlets. For efficient
operation of the cabinet, providing adequate ventilation and ambient temperature (below 38°) is
essential.
Prior to installation of the unit, a gap of at least 300 mm must be left from the ceiling as outlets of
the used air are located at the top of the unit.
Shelving
Inside the cabinet, there is a shelf package. Remove all packaging material. Each shelf is paired
with 4 support brackets (shelf clips).
The shelves can be positioned at different heights for customer’s preference. Always ensure that
the support brackets are securely engaged in each of the shelf support rail.
It is recommended that the cabinet operates for 30 minutes prior to loading product.
To Next Page
Loading...
