SKIPIO SFT45-2 - Troubleshooting

Troubleshooting
Issue
Possible cause
Resolution
Warm cabinet temperature
High temperature setting
Condenser blockage
Poor ventilation environment
Adjust temperature setting
Clean condenser
Provide good ventilation around the side
and back of the unit
Power consumption is higher
than supposed to be
Dirty Condenser
Unit operating in high temperatures
Cabinet doors are opened excessively
Clean condenser
Provide good ventilation around the side
and back of the unit
Keep door/s open for minimum time
Water leakage inside cabinet
Unit is not levelled properly
Level the unit
(Ref: 2 Installation – Levelling)
No power to unit
Unplugged
Power switch off in the condensing unit
(Ref: 3 Operation – Power On/Off)
Plug in
Power switch on in the condensing unit
(Ref: 3 Operation – Power On/Off)
Noise
Unit is not levelled properly
Level the unit
(Ref: 2 Installation – Levelling)
dsd