3.OPERATION
Start Up
Plug into the main power supply and check operation of the unit, front display and lighting. The
compressor and the condenser and evaporator fans should all operate within 2 minutes from the
moment the unit is plugged in. The cabinet light (inside) will go on when a door is opened.
Electronic Controller
SKIPIO electronic controller controls and displays the internal cabinet temperature. For general
operation, no initial setup or additional programing is required. When the cabinet is connected to
the power supply, the current cabinet temperature will be displayed on the electronic controller.
Generally, the compressor and evaporator fan will operate within 2 minutes after power is supplied
to the cabinet.
1. Electronic controller for refrigerators/freezers (SUR/SUF-series and its drawer models)
Factory setup temperature of SUF-series is - 18°C and ranged from -21°C to -12°C. For SUR-
series, factory setup temperature is 2°C and ranged from 1°C to 8°C.
To Next Page
Loading...
