SKIPIO SUF15-2 - PCB Function Manual; 3-4-1.How to Set up Manual Defrost; How to Remove the Manual Defrosting

23
3-4. PCB Function Manual
3-4-1.How to set up manual defrost
Cancel the frosting function of evaporator.
STEP
OPERATION
DISPLAY
RESULT
Step 1
Push the ▼ ▲ button Five seconds.
Step 2
Push the ▼button once
Step 3
Push the ▼button once
Start manual defrost
The shortest defrosting time is twenty minutes, the longest defrosting time is 40 minutes.
3-4-2. How to remove the manual defrosting
STEP
OPERATION
DISPLAY
RESULT
Step 1
Push the ▼ ▲ button Five seconds.
Step 2
Push the ▼button once
Step 3
Push the ▼button once
It will indicated the current
inner temperature.
1. By pushing the up/down button, you can set the
inside temperature, temperature will be displayed.
1. After PCB setting ,bar LED show the unit inside
temperatue