Skipper GDS101 Quick Start Guide

Name Institution Role
Reederei Briese Briese Schiffahrts GmbH & Co. KG Engineer In Charge
Components
The system consists of the Navigation Sounder transducer located in the keel and an operational unit on the bridge deck.
No subdevices available.
Position
Info
xyz-position of transducer from Alignment Survey Report RV Heincke (January 2016). The console is located on the bridge
deck.
X
46.668 m
(Positive X axis is forward and along the centerline of the vessel with X0 at the Stern point of the vessel.)
Y
0.138 m
(Positive Y axis is portside of centerline with Y0 at centerline at the Very stern point of the vessel.)
Z
-0.077 m
(Positive Z axis is upwards of basis. Z0 is set to the hydrophone on midship.)
Data logging, storage and archiving
Logged parameters
Parameter Sensor Output
Type
Unit
depth depth m
Central geographical ship's position and time standard
Time synchronization and geographical positioning is done by DShip receiving the data for logging
Rawdata storage on board
Data storage in DShip system.
Dship
Uncorrected measurement data.
Device name
Navlot
Parameters
Depth [m]
Data archiving on land
After the cruise the DShip data set can be extracted from .https://dship.awi.de/
Documentation
Skipper GDS101 manual (User Manual, 3 MB)

Skipper GDS101 Specifications

General

Brand	Skipper
Model	GDS101
Category	Marine Equipment
Language	English