EasyManua.ls Logo

Skipper GDS102 - User Manual

Skipper GDS102
77 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Document no: DM-G002-SB
Rev: 1702
For software rev: 1.13.01
Edition: 2017-06-12
SKIPPER Electronics AS Telephone:+47 23 30 22 70
Enebakkveien 150 Telefax: +47 23 30 22 71
P. O. Box 151, Manglerud E-mail: support@skipper.no
0612 Oslo, Norway Co. reg. no:NO-965378847-MVA
www.skipper.no
GDS102
Operation and Installation Manual
Dual Channel Graphic Depth Sounder (10 - 265 kHz)

Table of Contents

Questions and Answers

  • C
    Cheryl MendezJul 31, 2025
    What to do if the main voltages are outside the acceptable range in my Skipper Diving Instrument?
    • J
      jamesarcherJul 31, 2025
      If the main voltages of your Skipper Diving Instrument are outside the acceptable range, this could be due to a CPU or I/O PCB problem, a terminal PCB problem, a CPU problem, a transceiver PCB problem, an interconnect problem, or a defect in the power supply. Suggested solutions include: replacing the CPU or I/O PCB, replacing the terminal PCB, replacing the CPU, replacing the transceiver PCB, checking the connections between the terminal PCB and the transceiver PCB, or replacing the transceiver board and/or terminal board.
  • S
    Sarah HortonAug 15, 2025
    What to do if main voltages are outside acceptable range in Skipper GDS102 Marine Equipment?
    • J
      Joshua DavisAug 15, 2025
      If the main voltages of your Skipper Marine Equipment are outside the acceptable range, this could be due to a CPU or I/O PCB problem, a terminal PCB problem, a CPU problem, a transceiver PCB problem, an interconnect problem, or a defect in the power supply. Suggested solutions include replacing the CPU or I/O PCB, replacing the terminal PCB, replacing the CPU, replacing the transceiver PCB, checking connections between the terminal PCB and transceiver PCB, or replacing the transceiver board and/or terminal board.

Summary

1. INTRODUCTION

2. OPERATION

Key Operational Functions

Explains core functions like Depth Range, Picture Speed, Gain, and TVG.

3. INSTALLATION

Transducer and Unit Installation

Guidelines for transducer and operator unit mounting.

4. START-UP AND SYSTEM ADAPTION

Frequency and Filter Settings

Adjusting channel frequencies and filter bandwidth using DIP switches.

5. TROUBLE SHOOTING

System Status and Diagnosis

Using screen 11 for system status and diagnosing problems.

7. SYSTEM SPECIFICATIONS

8. SERVICE

CPU Setup and Software Upgrade

Configuring CPU BIOS and updating system software.

System Reset and Configuration

Performing a master reset and managing system configurations.

9. EMC MOUNTING KIT

Skipper GDS102 Specifications

General IconGeneral
BrandSkipper
ModelGDS102
CategoryMarine Equipment
LanguageEnglish

Related product manuals