Need help?Do you have a question about the Skipper ESN200 and is the answer not in the manual?
General| Operating Temperature | -20°C to +55°C |
|---|---|
| Storage Temperature | -30°C to +70°C |
| Type | EPIRB |
| Frequency | 406 MHz |
| Range | Global |
| Activation | Manual or automatic |
| Battery Life | >48 hours |
| Compliance | IMO, GMDSS |
Details the key features of the ESN200 navigational echo sounder system, including automation and integration.
Provides a high-level overview of the ESN200 system, detailing the Display unit and Electronic unit.
Guidance on optimal placement of transducers to ensure noise-free measurement and prevent aeration.
Specifics on transducer cable types, lengths, and connection details for system units.
Configuring the Echo Sounder system, including selecting and setting up connected transducers.
Adjusting core echosounder parameters like Auto Functions, Vessel Image, and speed of sound.
Details on activating optional features like Speed of Sound, Mute, and Advanced Diagnostic Setup.
Configuring NMEA outputs, inputs, and LAN communication for data exchange.
List of accepted NMEA sentences and their functions for system integration.
Configuration of auxiliary outputs and inputs, including alarm and sync functions.
Customizing the runtime screen to display desired parameters from the system or external sources.
Managing display parameters, including screen setup, dimming, and network configuration.
Setting dimming levels and color themes for the display, either locally or remotely.
Configuring shallow water alarms, deep water alerts, and system failure notifications.
Establishing and configuring network settings for communication between the Display and JB70E2 units.
Setting up network parameters, system name, and logging for the JB70 electronic unit.
Connecting and configuring printers for continuous or page printing of echosounder data.
Setting up PC connectivity for printing, history download, and software upgrades.
Instructions for upgrading the software on both the Display and JB70 units using service software.
Overview of the ESN200 echosounder, its dual channels, and frequency selection options.
Explanation of how Auto Functions automatically adjust range, gain, and frequency based on depth.
Details on operating the system in manual mode, allowing user control over range, gain, and TVG.
Guide to customizing the main screen display by selecting adjustable features and information.
Accessing and viewing the last 24 hours of depth recording, including GPS and other measurements.
Setting up extended logging of system values internally or externally to SD or USB disks.
Overview of diagnostic functions to help identify and resolve system issues, including parameter testing.
Explains 'lost bottom' mode and how the system behaves when the seabed cannot be located.
Procedure for using the ETT985 tester to check signal output and noise characteristics.
Dimensional drawings and cut-out specifications for flush mounting the ESN200 display unit.
Details and diagrams for the optional MG-0002 mounting bracket for the 9-inch display.
Instructions for installing the JB70E2-SA unit onto a standard DIN mounting rail.
Information on the ENS518-SA transducer selector switch for managing multiple transducers.
Definitions for common symbols, abbreviations, and acronyms used throughout the manual.
To Next Page
