Skipper GDS102 - Fig. 2.9. Screen 8. Recordings Selection and Play Back

Page 21 of 77
SKIPPER Electronics AS
Edition: 2017-06-12
GDS102 Operation and Installation Manual
First Page Last PagePrev Page Next Page
Chapter: 2 Operation
Fig. 2.9. Screen 8. Recordings selection and play back.
If recording mode is activated, the depth and all essential navigational data along with echo sounder settings will be written into
the les on the Compact Flash disk. The left half of this screen (recordings directory) represents the list of the recorded les
which are sorted by the time of the recordings. The left part of the directory represents the date and hour of the recorded data,
while the right part - minutes of the hour/date, which have been chosen by the cursor in the left part. The cursor is indicated by a
bar and can be advanced by “REC. HOUR” and “REC. MIN” soft keys. A group is dened by setting the rst recording (soft key
SELECT rst) and the last recording (SELECT last). The selected rst and last recordings are indicated in the bottom part of the
directory.
Example: Suppose we need to play back the information which has been recorded between 14.Aug.2012 11:34 and 16 Aug.2012
13:38.
• Advance the bar in the left part of the directory by using soft key “REC. HOUR next” on the position 14.Aug.12 11:xx
• Advance the bar in the right part of the directory on the position 11:34 by using soft key “REC. MIN next”
• Press “SELECT rst” soft key. The group’s rst recording is now selected.
• Advance the bar in the left part of the directory by using soft key “REC. HOUR next” on the position 16.Aug.12 11:xx
• Advance the bar in the right part of the directory on the position 16 Aug 13:38 by using soft key “REC. MIN next”
• Press “SELECT last” soft key. The group’s last recording is now selected.
It is now possible to start a playback. The name of currently displayed recording is indicated in the upper part of the screen.
Note: Playback and recording functions cannot be activated at the same time.
Soft
key
Name Range/value Default value Description
1 REC. HOUR Next Advance cursor to the next hour of recordings in the directory.
2 REC. MIN Next Advance cursor to the next minute of recordings in the directory.
3 SELECT First Select group’s rst recording.
4 SELECT Last Select group’s last recording.
5 RECORDING On/o On Toggles recording mode.
6 PLAY BACK On/o O Toggles playback mode.