Skipper GDS102 - NMEA Received;Input Messages

Page 55 of 77
SKIPPER Electronics AS
Edition: 2017-06-12
GDS102 Operation and Installation Manual
First Page Last PagePrev Page Next Page
Chapter: 4. Start-up and system Adaption
1
2
3
4
5
6
7
8
9
9 Pin D-SUB (female
connector) in cabinet front
seen from outside.
NMEA IN: Pin 1-2, RCV1 A, B
NMEA IN: Pin 6-7, RCV2 A, B
NMEA OUT: Pin 4-5, XMT1 A, B
NMEA OUT: Pin 8-9, XMT2 A, B
Fig. 4.1. NMEA connector XJ402.
NMEA received/input messages
The talker identier is ignored.
Time
Universal time ZZU,xxxxxx
Universal time & local ZLZ,xxxxxx,xxxxxx,-xx
Day, month, year ZDA,xxxxxx,xx,xx,xxxx,-xx
The time values will be indicated in the upper left corner of the screen, example: 11:43.
Position
Geographical lat/lon GLL,xxxx.xx,N,xxxxx.xx,W
GPS position GGA,xxxxxx,xxxx.xxx,N,xxxxx.xxx,W,x
The position values will be indicated on top of the screen, right side, example: E059° 13.12´ N010° 57.34´.
Heading
Heading, true, present HDT,xxx.,T
Heading, magnetic, present HDM,xxx.,M
Heading, compass HCC,xxx.
The heading values will be indicated on top of the screen, right side, example: 123.0°.
Alarm
Silence alarm for 30 seconds ALF ACN,102104.00,,230,<1-999999>,s,c*hh
Request/Repeat ALF info ALF ACN,102104.00,,230,<1-999999>,q,c*hh
Acknowledge alarm ALR(B). ACK,xxx*hh<CR><LF>
Silence alarm ALR(A) ACK,xxx*hh<CR><LF>
Speed
Dual ground/water speed VBW,xx.xx,Axx.xx,a,uxx.xx,uxx.xx,a
The speed value will be indicated on top of the screen, right side, example: 15.55 kts.
Composite
GPS, transit specic RMC,xxxxxx,a,xxxx.xx,N,xxxxx.xx,W,xx.x,xxx.,xxxxxx,,*xx
Track and ground speed VTG,xxx.,T,xxx.,M,xx.x,N,xx.x,K
Heading and water speed VHW,xxx.,T,xxx.,M,xx.x,N,xx.x,K
The composite values will be indicated on dierent positions on top of the screen, depending on message type.