Page 24 of 77
SKIPPER Electronics AS
Edition: 2017-06-12
GDS102 Operation and Installation Manual
First Page Last PagePrev Page Next Page
Chapter: 2 Operation
Fig. 2.12. Screen 11. System status screen.
This screen shows a comprehensive list of system settings and parameters.
Soft key Name Range/value Default
value
Description
1 SCREEN Print Screen hardcopy, can be used for documentation and
trouble-shooting.
2 PRINT TYPE HP Deskjet, Epson
D88, LQ-350+
Epson-D88 The printer type.
(For Epson LQ-300 printer use LQ-350 driver)
3 SIMULATE On/o O
Toggles built-in simulator. When simulator is activated “
S”
text is displayed in the lower right corner of the screen.
4
5 STORE Ship def Once a realistic setup has been selected, the user can store
these settings. If the settings are then changed, the stored
setup can be restored using the RECALL button.
6 RECALL Ship def, fact def Recalls the previously stored setup options. Short push
switches between options while a push for about 5 sec
recall the chosen settings. Recall is conrmed by a buzzer
beep.
Note: Soft key 1 SCREEN appears “dimmed” if there is no printer connected.
To Next Page
Loading...
