Skipper GDS102 - Clock and Calendar Settings; Language; Units of Measurement

Page 53 of 77
SKIPPER Electronics AS
Edition: 2017-06-12
GDS102 Operation and Installation Manual
First Page Last PagePrev Page Next Page
Chapter: 4. Start-up and system Adaption
Clock and calendar settings
Screen 5 is dedicated to the real-time clock and calendar adjustments, see “Fig. 2.6. Screen 5. Calendar
and clock setting.” on page 18. Note: If time and date information is provided on NMEA inputs, this
will be used by the sounder and the soft keys are not operative.
Language
In screen 6 it is possible to select dierent languages and units of measurement for the screen and printer.
See “Fig. 2.7. Screen 6. Units of measurement.” on page 19. The available languages are: English,
French, Spanish, German and Norwegian.
Units of Measurement
Units of measurement may be selected for:
• Depth: meters, feet, fathoms, braccias.
• Vessel speed: knots, km/h, miles/h.
• Sound speed: m/s, knots, km/h, mi/h, ft/s (feet/s)