Page 66 of 77
SKIPPER Electronics AS
Edition: 2017-06-12
GDS102 Operation and Installation Manual
First Page Last PagePrev Page Next Page
Chapter: 5. Trouble shooting
Typical Status Screen 11 Contents
The status screen 11 contains information that will facilitate analysis and correction of several problems.
A printout or picture of the status and oscilloscope screens should be sent with any report about functional
disturbance. This will greatly facilitate remote failure analysis.
The other information on the status screen is a collection of information which may be observed and
manipulated with the various screen soft key selections. As a reference, it will often be more convenient to
observe the various settings together on this screen, than to cycle from screen to screen to check on the soft
key texts.
Dual numbers (50 %/50 %) refers to channels (Ch 1/Ch 2).
To Next Page
Loading...
