Instruments and warning lights
Instrument cluster
Introduction
This chapter contains information on the following subjects:
Overview
9
Revolutions counter 10
Display 10
Speedometer 10
Coolant temperature gauge 11
Fuel gauge 11
Counter for distance driven
12
Setting the time 12
Viewing the charge level vehicle battery
12
Service interval display
12
Auto-check control 13
Component protection
If the message SAFE CP appears in the instrument cluster display, the component
protection for the instrument cluster is active. Further information » page 202,
Component protection.
Fault display
If there is a fault in the instrument cluster, the following message will appear in
the display.
Error: Instrument cluster. Workshop!
COMBIINSTRUM_WORKSHOP
Seek help from a specialist garage.
WARNING
■
Concentrate fully at all times on your driving! As the driver you are fully re-
sponsible for the operation of your vehicle.
■
Never operate the button
6
in the instrument cluster » Fig. 2 on page 9
while driving, only when the vehicle is stationary!
Overview
Fig. 2
Instrument cluster
First read and observe the introductory information and safety warn-
ings on page 9.
Revolutions counter with warning lights » page 10
Display » page 10
›
With counter for distance driven » page 12
›
With service interval display » page 12
›
With digital clock » page 12
›
With information system » page 25
›
With control symbols » page 20
Speedometer
1)
with warning lights » page 10
Coolant temperature gauge » page 11
1
2
3
4
1)
During the journey, the speed can be displayed in a different unit (mph or km/h) in addition to the
tachometer display.
9
Instruments and warning lights
To Next Page
Loading...
