Infotainment operation
Infotainment operation
Operation principles and screen areas
Fig. 153 Screen area / screen display
Description of the display » Fig. 153
Status line with time and outdoor temperature data and other information
Information and the operation of the current menu
Function surfaces of the current menu
Identification of the current menu
Return to the higher-level menu
Sliding regulator
Menu item with “Checkbox”
▶
- Function is switched on
▶
- Function is switched off
Open a sub menu of the menu item with the “pop-up window”
Functional surfaces
The screen areas which confirm a function or a menu are called “function sur-
faces”.
▶
White text - the surface is active and thus selectable
▶
Grey text - the surface is inactive and therefore not selectable
▶
Green frame - currently selected surface
A
B
C
D
E
F
G
H
Selecting menu/menu item/function
▶
Drag your finger over the screen in the required direction.
▶
By moving your finger over the slider
▶
Turning the knob (not applicable to Infotainment Columbus).
Confirming menu/menu item/function
▶
By tapping on the function surface.
▶
By pressing the knob (not applicable to Infotainment Columbus).
Returning to the higher-level menu
▶
By tapping on the function surface .
▶
By tapping on the screen outside of the “pop-up window”.
▶
By pressing the corresponding button next to the screen (e.g. in the Media
menu, by pressing the
button) (not applicable to Infotainment Colum-
bus).
Selecting the menu item/function value
▶
- Selected menu item / function value
▶
- Deselected menu item / function value
Set value
▶
By tapping on the function surface
or
the bottom of the screen.
▶
By touching or moving your finger over the scale.
▶
Turning the knob
(not applicable to Infotainment Columbus).
Note
Depending on the equipment fitted, Infotainment can be operated using the
buttons on the right-hand operating lever or on the multifunction steering
wheel. Further information » page 44.
121
Infotainment operation
To Next Page
Loading...
