Assign a station logo
›
Tap on the function surface in the Radio main menu →
Station logos
.
›
Tap on an occupied station button and select the data carrier (SD card, USB).
›
Search for and select the desired station logo on the respective data carrier.
Remove station logo
›
Tap on the function surface in the Radio main menu →
Station logos
.
›
Tap on the station button from which you want to remove a logo.
›
orThe function surface
All
to delete the logos of all the station buttons si-
multaneously.
›
Confirm / cancel the removal.
Note
■
The following image formats are supported: jpg, gif, png, bmp (we recom-
mend using the png format).
■
Maximum resolution 400x240 pixels.
TP Traffic program
›
To switch on/off traffic monitoring in the main menu Radio, tap on the func-
tion surface
→
Traffic programme (TP)
.
During a traffic announcement, it is possible to cancel the current announce-
ment if necessary by deactivating traffic monitoring.
Note
■
If the station that is currently set does not transmit traffic reports or the sig-
nal is not available, then Infotainment automatically searches in the back-
ground for another TP station.
■
During playback in the Media menu or a station in the AM radio range, traffic
news is received from the previously selected FM radio range.
Media
service
Main menu
Fig. 165
Media: Main menu
Fig. 166
Album overview (valid
for Infotainment Colum-
bus)
›
To display the main menu, press the
button.
›
or:: Press the
button, then tap on the function surface .
Main menu » Fig. 165
Information on playing track
Playback timeline with a slider
Select the audio source
Selected audio source and selected album image / display the Album over-
view (applies to Infotainment Columbus)
Depending on the audio source type:
▶
Folder/Title list
▶
Multimedia database
Settings for the Media » page 132 menu or » page 138
A
B
C
D
142
Infotainment
To Next Page
Loading...
