Restore
The procedure for entering voice commands can be restarted in one of the fol-
lowing ways.
▶
By tapping on the function surface .
▶
By pressing the button
on the Infotainment.
▶
By pressing the button on the multifunction steering wheel.
Not recognising a voice command
If a voice command is not recognised by the Infotainment system three times
in succession, then voice control is stopped.
Correction of a voice command input
A voice command can be corrected, modified or re-entered by pressing the
button
or the button on the multifunction steering wheel. However,
this is only possible as long as the
symbol is displayed on the screen.
You do not have to wait until the voice command is recognised by Infotain-
ment.
Voice commands can be used at any time during voice control
Voice command Function
“Back” Return to the previous menu
“Help” Reproduce and display possible voice commands
Voice commands that can be used while browsing the list entries
Voice command Function
“Next page”
Browse menu/list/directory
“Previous page”
“First page”
“Last page”
Additional Information
Navigation – applies to Infotainment Amundsen
To enter a destination, you must first issue the command“Enter address” and
then follow the Infotainment instructions.
You can say the house number and, if necessary, another address item in the
form of a number. Infotainment will then offer the number combinations it has
found if the house number and the further address item exist in the street en-
tered.
It is not necessary to spell city and street names if the entered destination is
located in a country that has no voice control available for the language.
Online POI search – applies to Infotainment Amundsen
When Infotainment Online » page 17 services are activated, a POI search can
also be carried out online by issuing the voice command “Find online POI”.
Radio
To enable a radio station to be selected using voice command, the station
must be stored in the list of available stations » page 118 or in the preset list
» page 118.
Updating the Infotainment software
Fig. 137
Available software updates on
the ŠKODA websites
The software update ensures optimum operation of Infotainment (e.g. com-
patibility with new telephones).
Current information on Infotainment compatibility can be found on the follow-
ing ŠKODA websites. This is done by scanning the QR code » Fig. 137 or enter-
ing the following address into the web browser.
http://go.skoda.eu/updateportal
Applies to Infotainment Amundsen
▶
To determine the software version, press the
button then tap the func-
tion surface →
System information
.
▶
To start the software update, press the
button, then tap the function
surface →
System information
→
Update software
.
Applies to Infotainment Swing
▶
To determine the software version, press the
button, then tap the
Sys-
tem information
function surface.
▶
To start the software update, press the
button, then tap the
System in-
formation
→
Update software
function surface.
104
Infotainment
To Next Page
Loading...
