Storing the tyre pressure values by means of the button
Fig. 219
Key for storing the pressure val-
ues
Read and observe
and on page 187 first.
›
Inflate all the tyres to the specified pressure.
›
Switch on the ignition.
›
Press the symbol key
» Fig. 219 on the button and hold.
The warning light
in the instrument cluster illuminates.
An acoustic signal sounds and the warning light goes out, indicating that the
tyre pressure values have been stored.
›
Release the symbol key
.
Towing device and trailer
Hitch
Introduction
The maximum trailer nose weight when towing a trailer is 50 kg. Other infor-
mation (e.g. on the nameplate of the trailer device) provide only about the test
values of the device information.
WARNING
■
Check that the tow bar is seated correctly and is secured in the mounting
recess before the start of every journey.
■
When the ball rod is not used and properly secured in the receiving shaft,
this could be damaged or incomplete and must not be used - risk of acci-
dent.
■
Do not modify or adapt the towing device in any way.
■
Keep the mounting recess of the towing equipment clean at all times.
Such dirt prevents the ball head from being attached securely.
Description
Fig. 220 Carrier for the towing device / tow bar
Read and observe
on page 188 first.
The ball rod is detachable and is located in the stowage compartment for the
spare / emergency wheel.
188
Driving
To Next Page
Loading...
