Fuses and light bulbs 267
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data
Lighting in storage compartment on front passenger
side
– Insert a small screwdriver into the slot next to the light
⇒ fig. 205 and carefully lever out the light in the direction of
the arrow .
– Unplug the connector.
– Take the faulty bulb out of and insert a new one.
– Plug in plug.
– Insert the light and press it into the wall of the storage
compartment.
Entry lighting
– Insert a small screwdriver into the slot next to the light
⇒ fig. 206 and carefully lever out the light.
– Unplug plug .
– Push away the spring clip on the cover and remove the
cover.
– Take the faulty bulb out of and insert a new one.
– Insert the cover again and secure it by locking it in place.
– Plug in plug.
– Insert the light from the rear and press it forwards up to the
stop.
Fig. 205 Storage
compartment: Lighting
1
Fig. 206 Inner part of
the door: Entry light
1
2
.
,
.
To Next Page
Loading...
