Why is my Skope TME1000 Chiller compressor running for long periods?
If your Skope Chiller's compressor is running for more than an hour, it could be due to a blocked condenser. Clean the condenser coil to resolve this. Another potential cause is poor ventilation around the refrigeration unit; ensure the cabinet has good ventilation. Also, make sure the cabinet is within the maximum operating temperature.
What to do if my Skope TME1000 cabinet temperatures are too warm?
If your Skope Chiller's cabinet temperatures are too warm, one possible cause is a blocked condenser. Clean the condenser coil. Also, ensure the cabinet has good ventilation around the refrigeration unit. Finally, verify that the cabinet is within the maximum operating temperature.
What to do if my Skope Chiller power consumption is higher than expected?
If your Skope Chiller's power consumption is higher than expected, it might be operating too hot. Clean the condenser coil. Ensure the cabinet has good ventilation around the refrigeration unit and is within the maximum operating temperature. Make sure the door is closed more often, adjust the door tension, and if necessary replace the door torsion bar. Also, check the door gasket.
What to do if the product in my Skope TME1000 is too warm?
If the product inside your Skope Chiller is too warm, restricted airflow to the cabinet might be the reason. Ensure the product is not blocking airflow slots and that there is space around all the product.
What to do if my Skope Chiller cabinet is not operating?
If your Skope Chiller cabinet is not operating, check the mains power supply, as the cause may be a loss of power supply.
How to fix the interior light on a Skope Chiller?
If the interior light of your Skope Chiller is not working, the light tube may have failed. Replace the light tube.
Essential safety precautions and warnings to observe when installing the chiller.
Recommendations for optimal chiller placement to ensure efficient operation and longevity.
Steps to follow after positioning the chiller and connecting it to power.
Guidelines for loading products onto shelves to ensure optimal cooling and efficiency.
Diagnosing and resolving issues when the chiller is not functioning.
Addressing problems with product being too warm or inconsistent temperatures.
Essential safety precautions and warnings to observe when installing the chiller.
Recommendations for optimal chiller placement to ensure efficient operation and longevity.
Steps to follow after positioning the chiller and connecting it to power.
Guidelines for loading products onto shelves to ensure optimal cooling and efficiency.
Diagnosing and resolving issues when the chiller is not functioning.
Addressing problems with product being too warm or inconsistent temperatures.
The SKOPE TME Series Vertical Chiller is a commercial refrigeration unit designed for displaying and storing products at controlled temperatures. This manual, MAN10259 Rev. 4.0, published in July 2014, provides comprehensive instructions for its installation, operation, servicing, and troubleshooting.
The TME Series chiller is primarily used for the vertical display and cooling of various products in commercial settings. It maintains an internal air temperature typically between 2°C and 4°C, ensuring that stored items remain fresh and properly chilled. The unit features self-closing doors with internal torsion bars, designed to seal correctly and efficiently. It is equipped with LED lighting for both the interior and, in New Zealand models, an illuminated sign, enhancing product visibility and promotional capabilities. The refrigeration system includes a compressor, condenser, and evaporator fans that work in conjunction to circulate air and maintain the desired temperature.
To Next Page
General
