Why is my Skope TME1000 Chiller compressor running for long periods?
If your Skope Chiller's compressor is running for more than an hour, it could be due to a blocked condenser. Clean the condenser coil to resolve this. Another potential cause is poor ventilation around the refrigeration unit; ensure the cabinet has good ventilation. Also, make sure the cabinet is within the maximum operating temperature.
What to do if my Skope TME1000 cabinet temperatures are too warm?
If your Skope Chiller's cabinet temperatures are too warm, one possible cause is a blocked condenser. Clean the condenser coil. Also, ensure the cabinet has good ventilation around the refrigeration unit. Finally, verify that the cabinet is within the maximum operating temperature.
What to do if my Skope Chiller power consumption is higher than expected?
If your Skope Chiller's power consumption is higher than expected, it might be operating too hot. Clean the condenser coil. Ensure the cabinet has good ventilation around the refrigeration unit and is within the maximum operating temperature. Make sure the door is closed more often, adjust the door tension, and if necessary replace the door torsion bar. Also, check the door gasket.
What to do if the product in my Skope TME1000 is too warm?
If the product inside your Skope Chiller is too warm, restricted airflow to the cabinet might be the reason. Ensure the product is not blocking airflow slots and that there is space around all the product.
What to do if my Skope Chiller cabinet is not operating?
If your Skope Chiller cabinet is not operating, check the mains power supply, as the cause may be a loss of power supply.
How to fix the interior light on a Skope Chiller?
If the interior light of your Skope Chiller is not working, the light tube may have failed. Replace the light tube.
To Next Page
General
