Need help?Do you have a question about the sky rider EAGLE PRO DRW676 and is the answer not in the manual?
Essential safety guidelines for operating the drone and its components.
Further warnings related to fire, electric shock, battery handling, and chemical exposure.
Procedure to link the craft and remote control, ensuring gyroscopes calibrate for stable flight.
Placing the craft on a flat, level surface to begin the calibration process.
Powering on the remote control and observing its light for signal search.
Powering on the craft and noting LED formation lights blinking for signal search.
Performing stick movements on the remote to complete calibration and prepare for flight.
Adjusting trim settings to counter yaw/spin drift for stable flight.
Solution for yaw drift using Yaw Trim buttons on the left control stick.
Solution for pitch drift using Pitch Trim buttons on the right control stick.
Solution for roll drift using Roll Trim buttons on the right control stick.
Guidelines for safe flying, including open spaces, avoiding obstacles, and proper control usage.
Important safety warnings and restrictions for using VR Mode, especially regarding situational awareness.
Common causes and solutions for when the drone does not respond to controls.
Possible reasons for unstable flight and recommended troubleshooting steps.
Solutions for drift issues, including trim adjustment.
Addressing mechanical problems, vibrations, and loss of throttle response due to low battery.
To Next Page
General
