What to do if LED lights are on but Sky Rider Drones does not respond to controls?
If the LED lights are on but your Sky Rider Drones doesn't respond to controls, it likely indicates low battery power. Recharge the battery to resolve this issue.
Why my Sky Rider Drones does not respond to controls?
If your Sky Rider Drones does not respond to controls, it could be due to several reasons: * Check the remote batteries and replace them if needed. * Ensure the power plugs are firmly connected. * Make sure that the drone is within the remote's 164 ft. range.
How to fix sky rider MINI GLOW DR157 if it is difficult to control?
If the Sky Rider Drones is difficult to control or flies erratically, the gyroscopes may be misaligned. Another possible solution is to power OFF the remote and craft and then reconnect.
What to do if sky rider MINI GLOW DR157 drifts while in flight?
If your Sky Rider Drones drifts while in flight, it may be because the trim is not set correctly or needs adjustment. Another option is to reset the trim settings.
Key safety guidelines for operating the drone, including intended age, proper usage, and pre-flight checks.
Further safety warnings covering fire/shock risks, battery handling, adjustments, and general operational precautions.
Step-by-step guide on how to properly charge the drone's battery, including connection, indicators, and time.
Instructions for pairing the remote with the drone and calibrating gyroscopes for stable flight.
Procedures for recalibrating gyroscopes and resetting trim settings to resolve erratic flight behavior.
A table listing common problems, their possible causes, and recommended solutions for troubleshooting the drone.
To Next Page
General
