SKY-WATCHER Star Discovery Mount - Part II: Getting Started; Parts Description; Installing the Mount

Part II: Getting Started
3
Parts description
When unpacking the mount box, depending on your controller model, you will find the
following parts enclosed:
Star Discovery SD-Track bundle
Star Discovery SD-GoTo bundle
Common Parts:
1. The Star Discovery mount
2. The tripod with adjustable legs
3. The accessory tray
Specific Parts to SD-Track
A1 Hand Controller
A2 Leg support for Hand Controller
A3 Mounting bracket assembly
Common Parts:
1. The Star Discovery mount
2. The tripod with adjustable legs
3. The accessory tray
Specific Parts to SD-GoTo
B1 SynScan version 4 hand controller
B2 Leg support for SynScan
B3 Connection cable for SynScan
Installing the Star Discovery mount for an observation
Install the base on the observation point. Extend the legs at desired height and level the base
(Fig. 1). You don’t have to align a leg to a specific direction. Please note the three screws
position on the base.
Fig. 1
Fig. 2
Fig. 3