7
3. Plug the blue end of the black
power supply cable into the blue
port of your Hub Two.
Plug the other end directly into
the mains and switch on.
1. Plug one purple end of your new
grey DSL cable into the top port of
your pre-ltered master socket.
2. Plug the other purple end of
the grey DSL cable into the purple
port of your Hub Two.
For the best
results leave
your Hub Two
switched on
all the time.
Go to page 8 >
PKG_000672-00_Rev.2_NR801 Set Up Guide.indd 9 05/07/2017 11:29
To Next Page
Loading...
Need help?
General
