Skybox 5500 Appliance 18
Chapter 6
You will be notified by email when Skybox Security publishes an upgrade to the Web Administration,
and the email will explain how to obtain the upgrade file. After saving the file, use the following
instructions to perform the upgrade.
To upgrade the Web Administration
1 In the Support tab, click Upgrade Web Administration.
2 Click Browse and navigate to the location where the update file (*.tar.gz) is stored.
3 Click Upgrade.
4 The update begins automatically. In the process, you are logged out of the Web Administration.
When the update is finished, you can log in again.
In this chapter
Rolling back changes to the Web Administration ................................................... 18
Rolling back changes to the Web Administration
When you upgrade the Web Administration, a backup copy is saved. You can use this backup to revert
to the previous version if there are any problems with the upgrade.
This procedure should be done via SSH after logging in as the root user.
To restore the previous version of the Web Administration, run the following commands:
1 service sysconf stop
2 service httpd stop
3
cd /opt/
4 mv skyboxwebadmin skyboxwebadmin_<date> (renames the current web administration
directory)
5
cp skyboxwebadmin_backup_<timestamp>/ skyboxwebadmin (copies the backup directory
to the skyboxwebadmin directory)
6
service sysconf start
7
service httpd start
Upgrading the Web Administration
To Next Page
Loading...