Skybox 5500 Appliance 19
Chapter 7
The Restore Appliance DVD that comes in the Skybox 5500 package is used to restore Skybox 5500 to
factory defaults.
Warning: Restoring Skybox 5500 erases all data on the Appliance.
To restore
1 Insert the DVD in the DVD-ROM drive.
2 Reboot the Appliance.
3 As soon as you see the Skybox Installation Menu window, press any key.
Note: If you do not press a key within several seconds, the Appliance boots from the local
drive.
4 In the menu, select the second option (Skybox Appliance Installation).
Note: The restore process takes approximately 25 minutes.
5 When the installation finishes, proceed from System configuration (see page 11).
Restore
To Next Page
Loading...