Skydrop Halo Sprinkler Controller - Step 2: Mount Skydrop Wall Plate; Optimal Wall Plate Mounting Height; Securely Mount Wall Plate; Mounting Tips and Best Practices

Step 2: Mount the skydrop
™
wall plate
Position the skydrop
™
wall plate
using the integrated level, and
secure using anchor screws
(included).
NOTE: Wall anchors are not necessary
for mounting to drywall. Pre-drilling
with a 1/8” (3mm) bit is recommended
when mounting to wood studs. Do not
over-tighten screws; hand tightening is
recommended.
TIP: Install at eye level for
optimal screen viewing.