SKYJACK, Page 80
February 2008
Mid Size & Full Size RT’s
Engine Powered
Section 2 - Operation Labels
6
7
5
3
1
2 1
4
No. Label Pictorial Description
1
Lift and Tie Down Points
Only use these points for lifting or tying down.
2
Connect Platform AC Supply
Connect AC power supply here for platform accessory outlet.
3
Warning - Do Not Alter
Aerial platform altering warning
4
Horizontal Load Rating*
Apply no more than the indicated side load. Operate below
indicated wind speed only.
*Rating will change over varying units.
5
Standards Compliance
Indicates standards to which the work platform complies.
6
No Jewelry
Caution. Do not wear jewelry.
7
Operator Checklist
Operator checklist. Perform check prior to use.
Back Side
To Next Page
Loading...
