EasyManua.ls Logo

Skyjack SJ46 AJ User Manual

Skyjack SJ46 AJ
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATION
MANUAL
SJ46 AJ, SJ51 AJ, SJ63 AJ
ARTICULATING BOOMS
213210AAAA
December 2019
AS

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Skyjack SJ46 AJ and is the answer not in the manual?

Skyjack SJ46 AJ Specifications

General IconGeneral
BrandSkyjack
ModelSJ46 AJ
CategoryLifting Systems
LanguageEnglish

Summary

OPERATION MANUAL

Section 1 – About this Mobile Elevating Work Platform (MEWP)

1.1 Read and heed

Important safety and operational information must be read and understood.

1.2 Primary assemblies

Identification of the main structural and functional components of the MEWP.

1.4 Maintenance responsibility

Defines the roles of the operator and owner in maintaining the MEWP.

Section 2 – General Safety Precautions

2.1 Electrocution hazards

Details risks associated with electrical conductors and minimum safe approach distances.

2.2 Safety instructions

General safety guidelines for operating the MEWP, including personal protective equipment.

2.3 Fall-protection

Requirements for fall protection and safe entry/exit procedures.

2.4 Worksite inspection

Procedures for inspecting the worksite to identify and mitigate potential hazards.

Section 3 – Familiarization

3.1 Overview of the MEWP

Visual identification of key MEWP components and their locations.

3.3 Control functions

Explanation of the base and platform control consoles and their functions.

3.4 Features and devices

Description of operational features like travel positions, drive speed, and tilt switch.

Section 4 – Inspections Before Operation

4.1 Operator’s responsibility

Tasks an operator must perform before each work shift, including inspections and tests.

4.2 Visual and daily maintenance inspections

Detailed checklist for daily visual checks of the MEWP's components.

4.3 Function tests

Procedures for testing the operational functions of the MEWP before use.

Section 5 – Operation

5.1 Energize the base control console

Step-by-step guide to powering up and starting the MEWP from the base console.

5.10 Energize the platform control console

Steps to power up and prepare the platform control console for operation.

5.11 Drive forward or rearward

Instructions for driving the MEWP forward and rearward.

5.12 Steer

Instructions for steering the MEWP.

5.24 MEWP shutdown

Procedures for safely shutting down and parking the MEWP.

Section 6 – Additional Procedures

6.1 Use the emergency-lowering function

Procedures for lowering the platform using the emergency system.

6.3 Release the brakes manually

Procedure for manually releasing the MEWP brakes for towing or winching.

6.4 Winch and tow the MEWP

Guidelines and safety precautions for winching and towing the MEWP.

6.5 Refuel

Instructions and safety precautions for refueling the MEWP.

Section 7 – Technical Diagrams and Specifications

7.1 Technical diagrams

Reach diagrams for different MEWP models (SJ46 AJ, SJ51 AJ, SJ63 AJ).

7.4 Specifications

Technical specifications including dimensions, operating times, and speeds.

7.7 Maximum platform capacities (evenly distributed)

Maximum load and personnel capacities for each MEWP configuration.

Section 8 – Labels

8.1 Engine side

Labels and their descriptions found on the engine side of the MEWP.

8.2 Engine compartment

Labels and their descriptions located within the engine compartment.

8.3 Front and rear sides

Labels and their descriptions on the front and rear sides of the MEWP.

8.4 Controls side

Labels and their descriptions found on the controls side of the MEWP.

8.5 Control compartment

Labels and their descriptions within the control compartment.

8.6 Platform

Labels and their descriptions located on the platform.

8.7 Platform control console

Labels and descriptions for the platform control console functions.

Section 9 – Unique Skyjack Features

Related product manuals