Skyjack SJ46 AJ User Manual

SJ46 AJ, SJ51 AJ, SJ63 AJ 213210AAAA
73
Move the MEWP for transport Section 6 – Additional Procedures
6.6-2 Hoist the MEWP
WARNING
Only qualied riggers must operate the machinery
during a lift.
1. Rotate the boom and put the MEWP in the
position shown in Figure 09 for SJ46 AJ/SJ51 AJ
and Figure 10 for SJ63 AJ.
2. Turn the main power disconnect switch to the
off position.
3. Remove all personnel, tools, and materials from
the platform.
WARNING
When you hoist the MEWP, the lifting devices must
be attached to the designated lift points only.
WARNING
Use chains with a load capacity sufcient to
withstand the MEWP weight. Refer to the serial
plate of the MEWP for the specied weight.
4. Attach the rigging to all four lift points as shown
and adjust the rigging to make sure the MEWP
stays level when you hoist it. Refer to Figure 09
for SJ46 AJ/SJ51 AJ and Figure 10 for SJ63 AJ.

Skyjack SJ46 AJ Specifications

General

Brand	Skyjack
Model	SJ46 AJ
Category	Lifting Systems
Language	English