SJ46 AJ, SJ51 AJ, SJ63 AJ 213210AAAA
59
Operator’s checklist (page 1 of 2) Section 4 – Inspections Before Operation
4.4 Operator’s checklist (page 1 of 2)
P N/A Comment (if item does not pass inspection)
Visual and Daily Maintenance Inspections
Labels - Do an inspection for damaged, or missing labels
Electrical - Do an inspection for loose, damaged, or missing components
Limit switches - Do an inspection for loose, damaged, or missing
components
Hydraulic - Do an inspection for loose, damaged, or missing components
E ngine compartment - Do an inspection for loose, damaged, or missing
components
Main power disconnect switch
Batteries
Hydraulic pump and motor
Swing drive
Muf er and exhaust
Engine control console
Engine air intake lter
Engine and engine pivot tray
Engine oil level
Control compartment - Do an inspection for leaks and loose, damaged, or
missing components
Base control console
Hydraulic tank
Hydraulic oil level
Hydraulic return lter
High-pressure lter
Manifolds
Emergency-power unit
Fuel tank
Base - Do an inspection for loose, damaged, or missing components
Turret transportation lock
Axles
Tie rod
Oscillating cylinders
Wheel/tire assembly
Turret rotation gear
Rotary manifold
Platform assembly - Do an inspection for loose, damaged, or missing
components
Platform railings
Fall-protection anchorages
Footswitch
Serial Number:
Model:
Hourmeter Reading:
Date:
Time:
N/A NOT APPLICABLE
Operator’s Name
(Printed):
Operator’s Signature:
Each item shall be inspected using the appropriate section
of the Skyjack operating manual. As each item is inspected,
check or complete the appropriate box.
Telescopic and Articulating Booms
Daily Operator’s Checklist
P PASS
Add a comment if the item does not pass inspection.
NOTE: Make a copy of this page or go to www.skyjack.com for a copy that you can print.
To Next Page
Loading...
Need help?
General
