Skyjack SJ 4620 Service Manual

SKYJACK, Page 8 SJIII Series
Section 1 - Scheduled MaintenanceOperator’s Responsibility for Maintenance
Scope of this Manual
a. This manual applies to the ANSI/SIA, CSA and CE versions of the SJIII Series aerial platform models listed
on Table 2.1.
- Equipment identified with “ANSI” meets the ANSI SIA-A92.6-2006 standard.
- Equipment identified with “CSA” meets the CSA B354.2-01 standard.
- Equipment identified with “CE” meets the requirements for the European countries, i.e., Machinery
Directive 98/37/EC and EMC Directive 89/336/EEC and the corresponding EN standards.
b. CSA (Canada) and CE (Europe)
Operators are required to conform to national, territorial/provincial and local health and safety regulations
applicable to the operation of this aerial platform.
c. ANSI/SIA (United States)
Operators are required by the current ANSI/SIA A92.6 standards to read and understand their responsibilities
in the manual of responsibilities before they use or operate this aerial platform.

Skyjack SJ 4620 Specifications

General

Brand	Skyjack
Model	SJ 4620
Category	Boom Lifts
Language	English