SJ 46A & SJ 46AJ
December 2007 Page 27
Section 2 - Operation Visual and Daily Maintenance Inspections
High Pressure Filter •
Ensure housing is secure and shows no -
visible damage or leakage.
Hydraulic Pumps•
Ensure there are no loose or missing -
parts and there is no visible damage.
Ensure all bolts are properly tightened.
-
Ensure all fittings and hoses are properly -
tightened and there is no evidence of
hydraulic leakage.
Muffler and Exhaust •
Ensure muffler and exhaust system are -
properly secured, with no evidence of
damage.
Engine Pivot Tray•
Ensure there are no loose or missing -
parts and no visible damage to the engine
pivot tray. Ensure that tray-securing bolt
is in place.
Engine Oil Level •
Maintaining the engine components -
is essential to good performance and
service life of the aerial platform.
WARNING
Beware of hot engine components.
Check oil level on dipstick
Oil level should be in the “safe” zone. -
Add oil as needed. Refer to Table 2.2b for
recommended oil type.
Engine Air Filter •
Ensure there are no loose or missing -
parts and there is no visible damage.
Fuel Leaks•
Ensure that there no fuel leaks.
-
DANGER
Engine fuels are combustible. Inspect
the aerial platform in an open, well-
ventilated area away from heaters,
sparks and flames. Always have an
approved fire extinguisher within easy
reach.
Ensure fuel tank, hoses and fittings show -
no visible damage and no evidence of
fuel leakage.
Charge Pressure
Filter
High Pressure
Filter
Muffler
Air Filter
Battery
Main Power
Disconnect
Switch
To Next Page
Loading...
Need help?
General
