Page 28 December 2007
SJ 46A & SJ 46AJ
Visual and Daily Maintenance Inspections Section 2 - Operations
2.8-6 Control Compartment
Ensure all compartment latches are -
secure and in proper working order.
Base Control Console•
Ensure all switches are returned to their -
neutral positions.
Ensure there are no loose or missing -
parts and there is no visible damage.
Hydraulic Tank •
Ensure hydraulic filler cap is secure. -
Ensure tank shows no visible damage -
and no evidence of hydraulic leakage.
Hydraulic Oil•
Be sure that the boom is in the stowed -
position, and then visually inspect the
sight gauge located on the side of the
hydraulic oil tank.
The hydraulic oil level should be between -
the minimum and maximum marks on the
sight glass. Add oil as needed. Refer to
Table 2.2b for recommended oil type.
Brake and Main Manifolds•
Ensure all fittings and hoses are properly -
tightened and there is no evidence of
hydraulic leakage.
Ensure there are no loose wires or -
missing fasteners.
Emergency Power Unit •
Ensure there are no loose or missing -
parts and there is no visible damage.
Ensure there are no loose wires or -
missing fasteners.
Ensure all fittings and hoses are properly -
tightened and there is no evidence of
hydraulic leakage.
Fuel Tank •
IMPORTANT
Before using your aerial platform ensure
there is enough fuel for expected use.
Ensure fuel filler cap is secure. -
Ensure tank shows no visible damage -
and no evidence of fuel leakage.
Hydraulic Tank
Brake Manifold Main Manifold
Base Control
Console
Fuel Tank
Emergency Power
Unit
To Next Page
Loading...
Need help?
General
