SJ 46A & SJ 46AJ
December 2007 Page 39
Section 2 - Operation Function Tests
Test Steering•
1. Restart engine.
2. Depress and hold footswitch.
3. Press rocker switch on top of drive/steer
controller to “
” left and “ ” right.
Result: Steer wheels should turn left and
right.
Test Driving Function•
WARNING
Ensure that there are no personnel
or obstructions in the path of travel,
including blind spots.
1. Ensure path of intended motion is clear.
2. Ensure boom is in stowed position and fly
boom fully retracted.
3. Depress and hold footswitch.
4. Slowly move drive/steer controller in
“
” forward or “ ” reverse direction
until aerial platform begins to move, and
then return handle to center position.
Result: Aerial platform should move in
forward or reverse direction, and then
come to a stop.
WARNING
DRIVING ON A SLOPE
When driving on a slope greater •
than 30%, the platform capacity
is limited to 300 lb. (136 kg).
The platform must be between •
the non-steer wheels and must
be on the downside of the hill.
When slope increases to •
above 45%, the forward drive
is disabled but reverse drive
remains active.
Drive/Steer
Controller
Horn
Engine start/on/off
Switch
To Next Page
Loading...
Need help?
General
