Page 22 Mid Size & Full Size RTs
Engine Powered
Visual & Maintenance Inspection Section 2 - Familiarization
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
2.3-9 Platform Assembly
WARNING
Ensure that you maintain three points of
contact to mount/dismount platform.
1. Use the ladder of aerial platform to access
platform.
2. Close the gate.
- Ensure there are no loose or missing
parts and there is no visible damage.
- Ensure all fasteners are securely in
place.
- Ensure all railings are properly positioned
and secured.
- Ensure gate is in good working order.
• Lanyard Attachment Anchors
- Ensure attachment rings are secure and
have no visible damage.
• AC Outlet on Platform
- Ensure outlet has no visible damage and
free from dirt or obstructions.
• Platform Control Console
- Ensure all switches and controller are
returned to neutral and are properly
secured.
- Ensure there are no loose or missing
parts and there is no visible damage.
• Powered Extension Control Console
(If Equipped)
- Ensure all switches are returned to
neutral and are properly secured.
- Ensure there are no loose or missing
parts and there is no visible damage.
WARNING
Ensure that you maintain three points of
contact to mount/dismount platform.
3. Use the ladder to dismount from platform.
Platform
Assembly
Platform Control
Console
Platform
Railing
FAMILIARIZATIONFAMILIARIZATION
To Next Page
Loading...
Need help?
General
