SJ 86T
December 2007 Page 47
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the MEWP.
FAMILIARIZATION
2.6 Emergency Lowering Procedures
This section guides the operator on how to use
emergency lowering system. This system allows
platform lowering in the event of an emergency or
engine malfunction.
WARNING
Do not operate emergency power unit
if platform capacity is exceeded. The
emergency power unit may be used to
release the platform from an obstruction
that has triggered an overload condition.
At Base Control Console:
1. Ensure engine is off.
2. Pull out “ ” emergency stop button.
3. S e l e ct e i ther “ ” b a s e p o s i tion o r
“ ”platform position from key switch.
4. Select “ ” emergency power position from
start/function enable/emergency power switch
and activate desired boom function.
At Platform Control Console:
1. Ensure engine is off.
2. Pull out “ ” emergency stop button.
3. Select “ ” on position from engine start/on/off
switch.
4. Depress and hold footswitch.
5. Select “ ” from emergency power unit switch
and activate desired boom function.
NOTE
If platform is overloaded in work mode,
emergency lowering is only available from
base controls.
Section 2 - Familiarization Procedures
To Next Page
Loading...
Need help?
General
