Page 72 December 2007
SJ 86T
Table 4.7 Operator’s Daily Inspection Checklist
N/A P F R N/A P F R
Work Light (If Equipped)
Glazier Tray (If Equipped)
Test Platform Capacity Zone Indicator Lights
Test Emergency Power
Test Off/Base/Platform Switch
Platform Control Console
Test Load Sensing System
Test Footswitch
Test Platform Capacity Zone Indicator Lights
Test Engine Start/On/Off Switch
Test Emergency Stop
Oscillating Cylinder Assembly Test Manual Platform Leveling
Wheel/Tire Assembly Test Steering
Swing Drive Motor Test Driving Function
Test Driving Speed
Test Emergency Power
Test Horn
Test Brakes
Test Differential Lock Switch
Test Secondary Guarding Electrical (SGE) (If Equipped)
Test Oscillating Axles
Test Cables
1158AB-AS
Steer Cylinder Assembly
Turret Rotation Gear
Platform Assembly
Platform Control Console
Fuel Tank
Fuel Leaks
Turret Transportation Lock
Drive Axle
Tie Rod
Hydraulic Oil
Test Platform Self-levelingHydraulic Return Filter
High Pressure Filter
Base Control Console
Test Start/Function Enable/Emergency Power Switch &
All Boom Functions
Test Main Power Disconnect Switch
Fuel Leaks
Base Control ConsoleControl Compartment
Test Emergency Stop
Hydraulic Pumps Hydraulic Generator (If Equipped)
Muffler and Exhaust
Engine Pivot Tray Flashing Amber Light (If Equipped)
Engine Compartment E-Chain
Main Power Disconnect Switch Cables
Optional Equipment/Attachments
Electrical Cylinders
Hoses
Visual and Daily Maintenance Inspections
Labels Boom
Time: Operator's Signature:
Each item shall be inspected using the appropriate section of the Skyjack operating manual.
As each item is inspected, check the appropriate box.
OPERATOR'S DAILY INSPECTION CHECKLIST
Serial Number:
Model:
Hourmeter Reading: Operator's Name (Printed):
Date:
Note:
Make a copy of this page or visit the Skyjack web site:
www.skyjack.com for a printable copy.
NOTE
The owner’s annual inspection decal must be completed after an annual inspection has been
completed.
To Next Page
Loading...
Need help?
General
