SJ 86T
December 2007 Page 83
17
16
No. Label Pictorial Description
16
Annual Inspection
Ensure that work platform has received annual inspection prior
to operation.
17
Emergency Lowering Procedure
Refer to Operating manual.
1. A) Ensure engine is off.
B) Pull out “ ” emergency stop button.
2. Turn off/base/platform key switch to “ ” base position.
3. Select “ ” emergency power position from start/function
enable/emergency power switch.
4. Activate desired boom function to lower platform.
18
Tie Down Points
Only use these points for tying down.
Control Side (Continued)
18