Page 92 December 2007
SJ 86T
No. Label Pictorial Description
1
SGE Reset (If Equipped)/Work Light (If Equipped)/Start
Engine/Generator (If Equipped)
Select to reset SGE (if equipped).
Select to enable work light (if equipped).
Push and hold “ ” to start engine and then return to “ ” on
position or select “ ” to turn engine off.
Select “ ” to turn hydraulic generator on or “ ” to turn it off.
2
Emergency Stop/Horn
Select “ ” to sound horn.
Read operating manual “ ”.
Push “ ” emergency stop to stop engine and disable controls.
3
Engine Controls/Emergency Power Unit
Select “ ” to enable emergency power unit.
Select “ ” low torque (higher speed) or “ ” high torque (lower
speed). Select “ ” high torque when driving on a slope.
Select either “ ” high or “ ” low engine throttle speed.
Select “ ” to engage differential lock or “ ” to disengage
differential lock.
Platform Control Console
31 2
To Next Page
Loading...
