Need help?Do you have a question about the Skytec PRO-480 and is the answer not in the manual?
Ensures correct electrical connection and safety compliance before operating the amplifier.
Procedure for safely powering the amplifier on and off in an audio system.
Guidelines for placing and operating the amplifier in a well-ventilated environment.
Instructions for making audio connections, emphasizing safety and cable quality.
Tips to avoid interference, ground loops, and common operational issues.
Details the power switch and its associated LED indicator.
Explains the function of the input level attenuator knobs.
Describes the display that indicates the master output level.
Describes the line input connectors for audio signals.
Details the speaker output terminals and connectors.
Identifies the power connector for the amplifier.
Ensures correct electrical connection and safety compliance before operating the amplifier.
Procedure for safely powering the amplifier on and off in an audio system.
Guidelines for placing and operating the amplifier in a well-ventilated environment.
Instructions for making audio connections, emphasizing safety and cable quality.
Tips to avoid interference, ground loops, and common operational issues.
Details the power switch and its associated LED indicator.
Explains the function of the input level attenuator knobs.
Describes the display that indicates the master output level.
Describes the line input connectors for audio signals.
Details the speaker output terminals and connectors.
Identifies the power connector for the amplifier.
General| Channels | 2 |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Power Output | 480W |
| Impedance | 4Ω |
| Input Sensitivity | 0.775V |
| Input Impedance | 10k Ohms |
| Power Supply | 220V, 50Hz |
To Next Page
