Skytec TEC6950 User Manual

Operation Manual
Models: TEC6200 (Ref: 171.100) 2 x 100W RMS
TEC6300
(Ref: 171.102) 2 x 150W RMS
TEC6500
(Ref: 171.104) 2 x 250W RMS
TEC6950
(Ref: 171.106) 2 x 500W RMS
Stereo Power Amplifier
A range of high output, high quality stereo power amplifiers offering
greater reliability for a wide range of Disco, Stage and P.A. applications.
Featuring . . .
• High quality design
• Robust construction
• Low noise and low distortion
• Gain controls for each channel
• Clip indication for each channel
• Short circuit protection with
protect LED indicator
• Low noise fan cooling
• 19” Rack mounting.
0 10 0 10
LEFT RIGHT
CLIP CLIPPROTECTPOWER

Skytec TEC6950 Specifications

General

Frequency Response	20Hz - 20kHz
Total Harmonic Distortion (THD)	< 0.1%
Crosstalk	> 70dB
Input Connectors	XLR, 6.3mm Jack
Output Connectors	Speakon, Binding Post
Impedance	4 Ohm
Input Impedance	20kΩ
Input Sensitivity	0.775V / 1V
Power Supply	220-240VAC / 50Hz

Summary

Stereo Power Amplifier Introduction

Product Models

Lists available Stereo Power Amplifier models (TEC6200, TEC6300, TEC6500, TEC6950) with their power ratings.

Key Features

Highlights main features like high quality design, robust construction, low noise, and gain controls.

Appliance Connections and Layout

Front Panel Overview

Details the controls and indicators on the front panel of all amplifier models.

Rear Panel Connections

Describes input/output sockets, fuse holders, and mains input for specific models (TEC6200/6300, TEC6500, TEC6950).

Operation and Specifications

Operating Instructions

Step-by-step guide for connecting loudspeakers, signal sources, and powering on the amplifier.

Troubleshooting and Best Practices

Advice for reliable operation, including connection checks, ventilation, and shock protection.

Technical Specifications

Detailed technical data for each amplifier model including power output, impedance, frequency response, and dimensions.