What to do if my Skytec Amplifier has no sound?
If your Skytec Amplifier has no sound, first verify the input selector position to ensure it's on the correct input. Then, check the connection line to make sure it's not broken. Finally, increase the volume knob, as it might be at its lowest setting.
How to stop microphone howl on Skytec ST080?
If you are experiencing microphone howl with your Skytec Amplifier, the microphone might be too close to the speaker. Move the microphone away from the speaker. Also, reduce the master volume.
What to do if the microphone has no sound on Skytec Amplifier?
If the microphone on your Skytec Amplifier has no sound, ensure the microphone is fully connected. Try adjusting the microphone volume. If that doesn't work, try changing the microphone.
General| Channels | 2 |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Input Sensitivity | 775mV |
| Impedance | 4 Ohm |
| Power Supply | 220-240V AC, 50Hz |
To Next Page
