TROUBLE SHOOTING
If you encounter problems with your fireplace system, the problem may be with the fireplace itself or it could be with the TM/R-AF1
remote system. Review the fireplace manufacturer's operation manual to make sure all connections are properly made. Then check
the operation of the remote in the following manner:
1. Make sure the batteries are correctly installed in the RECEIVER. One reversed battery will keep receiver from operating properly.
2. Check battery in TRANSMITTER to ensure contacts are touching (+) and (-) ends of battery. Bend metal contacts in for tighter fit.
3. Be sure RECEIVER and TRANSMITTER are within 20 to 25-foot operating range.
4. Keep RECEIVER from temperatures exceeding 120° F. Battery life shortened when ambient temperatures are above 115° F.
5. If RECEIVER is installed in tightly enclosed metal surround, the operating distance will be shortened.
NOTE:
1. Heat conditions can cause batteries to discharge when temperatures exceed 1150 F. Studies show that alkaline batteries, when
exposed to a constant temperature of 1200 F, can lose up to 50% of their operating power. When the battery cools down, it will
partially recharge itself, but constant heating and cooling will reduce the battery’s normal life expectancy.
SPECIFICATIONS
BATTERIES: Transmitter 12V - (A23)
Remote Receiver 6V - 4 ea. AA 1.5 Alkaline FCC ID No.'s: transmitter - K9LTMR2A; receiver - K9L330IRX
Operating Frequency: 303.8 MHZ Canadian ISC ID No.'s: transmitter – 2439A-TMR2A; receiver – 2439A 3301RX
FOR TECHNICAL SERVICE, CALL: U. S. INQUIRIES CANADIAN INQUIRIES
(855) 498-8324 or (260) 459-1703 (877) 472-3923
For Sales: (888) 672-8929
WEBSITE: skytechpg.com
MANUFACTURED EXCLUSIVELY FOR SKYTECH II, Inc
To Previous Page
Loading...
