EasyManua.ls Logo

SkyTraq PX1175RDP - Technical Specifications

SkyTraq PX1175RDP
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
TECHNICAL SPECIFICATIONS
Receiver Type 230-channel PHOENIX engine
GPS/QZSS L1/5, BeiDou B1I/B2a, Galileo E1/E5a, NavIC L5, SBAS L1
Accuracy Position < 1m CEP autonomous
1cm + 1ppm RTK mode
Velocity 0.05m/sec*
1
Time 12ns
Startup Time 1 second hot start under open sky
28 second warm-start under open sky (average)
29 second cold-start under open sky (average)
Reacquisition 1s
Update Rate 1 / 2 / 4 / 5 / 8 / 10 / 20 / 25 / 40 Hz
Operational Limits Altitude < 18,000m and velocity < 515m/s
Serial Interface 3.3V LVTTL level
Protocol NMEA-0183 V4.1
GGA, GLL, GSA, GSV, RMC, VTG
115200 baud, 8, N, 1
RTCM 3.x or SkyTraq raw data binary
115200 baud, 8, N, 1
Datum Default WGS-84 and user definable in stand-alone mode
Depends on base reference frame when in RTK mode
Input Voltage 3.3V +/- 10%
Input Current 240mA @ 3.3V
Dimension 17mm L x 22mm W x 2.9mm H
Weight: 2g
Operating Temperature -40
o
C ~ +85
o
C
Storage Temperature -55 ~ +100
o
C
Humidity 5% ~ 95%
*
1
50% @ 30 m/s for dynamic operation

Related product manuals