Skywalker STRC915.2 - Step 7: Attach Leg Posts and U-Shaped Legs; Step 8: Secure Corner Leg Sections

STEP 8
Secure everything in place using eight M6x70mm bolts (19),
16 M6 washers (20), and eight M6 nuts (21).
Repeat this step until all four corner leg sections are
assembled.
STEP 7
Insert all eight leg posts (4) into the sockets of the frame sections you
assembled in steps 2-5.
Then insert the assembled U-shaped leg sections into the leg posts.
4
Leg Post (x8)
(4)
(4)
(4)
(4)
Step 3
Step 5
19
M6x70mm
Bolt (x16)
20
21
M6 Washer
(x32)
M6 Nut
(x16)
11
(19)
(20)(21)
(19)
(19)
(19)
(20)
(20)
(20)
(20)
(20)
(20)
(20)
(19)
(21)
(21)
(19)
(19)
(19)(21)
(21)
(21)
(21)
(21)