STEP 2
Locate two sockets (3), one corner tube (1) and
one straight tube (2), and connect them together
as shown. Make sure the end with three holes
is on the left side and that the straight tube
connects to that end.
Make sure the other spring holes are facing down.
1
2
8
STEP 1
Register your trampoline! For info on warranty registration, see page 2.
Corner Tube (x1) Straight Tube (x1)
3
Socket (x2)
(3)
(2)
(3)
(1)
Three holes
on left side
Four holes
READ THIS BEFORE YOU BEGIN
• You’ll probably need at least two adults and 2 hours to assemble your trampoline (of course, that depends on
what model you have, and whether or not you’re secretly a superhero)
• We’ve provided some tools to help with assembly, but you’re more than welcome to use your own.
• The assembly steps refer to parts by their descriptions and key numbers (see the part list on page
3)
• The assembly steps are written in a specific order, and if you don’t follow them exactly, you may end up having to
start all over again
• Most importantly, this may not be the easiest thing you’ve ever done, but it will be worth it. Trust us
If you’re a visual learner, check out our assembly videos! They’re pretty great!
ASSEMBLY
skywalkertrampolines
Spring holes
face down
To Next Page
Loading...
