13
STEP 11
Enclosure Net (x1)
Jump Mat (x1)
9
8
The enclosure net (9) will be pre-installed to the jump mat (8).
Before continuing, make sure each V-ring of the jump mat
is properly threaded through the corresponding hole in the
enclosure net.
STEP 12
Place the jump mat on the ground inside the frame with the enclosure net on top. Place it so the jump mat lines
up with the frame. Be sure to center the enclosure door on the middle of a long side.
Warning label
Warning label
Enclosure door
Enclosure door
To Next Page
Loading...
